Metal Frame Elevated Pet Bed

Unlike the common fabric-covered pet beds on the market that are prone to moisture, have a stuffy bottom and cannot be used outdoors, this Metal Frame Elevated Pet Bed adopts a split hard support structure, breaking away from the traditional flat bedding design logic. The frame is made of rust-resistant rigid pipes for load-bearing, and the mesh surface is decorated with Japanese deep-sea sushi-style hand-painted prints, balancing both soft furnishing aesthetics and physical practicality.

Hand-painted printed fabric

1. Extremely simple line hand-painting technique

The surface mesh fabric is dyed using reactive dispersion printing technology. The dark blue base color is paired with single-line hand-painted patterns of seals, sushi, and tropical fish. This design is different from the common thick-gel printed fabrics that are prone to cracking, peeling, and hardening. The ink penetrates the fabric fibers to achieve color fixation, and it will not bleed during long-term washing or sun exposure. The mesh fabric will not become hard and lumpy.

2. Blue tone cold color visual cooling effect

The low-saturation dark sea blue color belongs to a universal cold color for home decoration, suitable for three mainstream home styles: rustic style, Japanese minimalist style, and modern minimalist style. It will not cause the color of pet furniture to stand out.

3. High-density mesh fabric resistant to snagging

The surface of Metal Frame Elevated Pet Bed uses 420D high-density polyester breathable mesh. The warp and weft are densely woven, which is resistant to the mild scratching of cats and is less likely to have local broken wires or mesh tears. Compared with ordinary low-density mesh fabric, its service life is increased by 60%.

Frame suspended off the ground structure

1. Standard 15cm off-ground height

Fix the off-ground height at 15cm, which complies with the pet ergonomic ventilation standard. Condensation water from the floor and humid air from the south wind cannot directly contact the pet's sleeping surface. This completely avoids long-term contact of the pet's abdomen with the ground, causing eczema, hair loss, and fungal infections. It specifically addresses the pain points of pet owners in southern and low-rise areas who want to keep pets.

2. Full-area air circulation at the bottom

The bed body has double-sided hollow ventilation on the top and bottom. When the pet lies down, the back and abdomen can simultaneously receive air circulation. It can dissipate heat passively without the need for electricity. Compared to fabric pet beds, the body surface heat dissipation efficiency is increased by 40%. It is suitable for short-haired cats such as British Shorthair, American Shorthair, and German Shorthair that are afraid of heat.

3. Hard frame resistant to deformation

The outer frame uses anti-rust metal round tubes/ABS engineering plastics in two versions. The pipe wall thickness is 0.8mm. It is formed by one-piece bending without welding breaks. The static load-bearing capacity can reach 10kg. It will not bend or deform even when being jumped on and stepped on by the pet for a long time.

Snap-on modular assembly design

1. Snap-lock connection

The frame connection of Metal Frame Elevated Pet Bed is all achieved through built-in snap-lock mechanisms. No need for screwdrivers, ropes, etc. Just align the slots and press to lock. When disassembling, simply press the snap-lock to separate. Even beginners can operate it quickly, reducing the assembly difficulty for end users.

2. Split and flat storage

After disassembly, the frame and mesh surface can be stacked flatly. The stacking thickness is only 4cm, which does not occupy the space of wardrobes or balconies for home storage. Cross-border logistics can compress the packaging, reducing the shipping volume of individual items and lowering the logistics costs for purchasers.

3. Versatile and portable adaptation for various scenarios

With a self-weight of only 0.9kg, it is lightweight and can be carried by hand. It can be used for park camping, placement in car trunks, temporary rest in pet hospitals, etc., helping pets have familiar bedding in unfamiliar environments and alleviating stress reactions.

TPR Anti-Slip Cushioning Floor Mat

1. Soft TPR anti-slip texture, suitable for all types of floors

Four supporting feet are independently inserted into the integrated TPR anti-slip floor mat. The surface has a cross anti-slip pattern. It can increase the static friction on polished tiles, solid wood floors, and granite surfaces, preventing the bed from tipping over or sliding.

2. Buffering, shock absorption, noise reduction, eliminating running noise

The TPR soft material has buffering and rebounding capabilities. When pets jump or enter and exit the bed, there will be no sharp noise caused by the friction between the metal pipe and the floor. It is not disturbing at night and can also buffer the impact force, protecting the limbs and joints of puppies and kittens.

3. Wear-resistant, anti-aging, and not prone to falling off

The floor mat is made using the interference fitting process, without glue application. It will not fall off or crack due to long-term ground friction. It avoids the common problem of glue losing adhesion at high temperatures. It is suitable for frequent use throughout the year.

Minimalist Hair Care Solution

1. All-round Velcro fixation, no difficulty in disassembly

The surface net fabric and frame are adhered together through the nylon Velcro on all four sides. There is no need to disassemble the frame; simply peel off the Velcro to remove the net fabric. It takes only 10 seconds for one person to complete the disassembly. There is no need to move the heavy frame for overall cleaning.

2. Water-resistant and shape retention, no odor generation

The polyester net fabric is resistant to 40℃ water temperature washing. Using the gentle mode is sufficient. After washing, it does not shrink, deform, or unravel. The perforated net surface is less likely to accumulate dander and saliva. Compared to plush toys, the odor retention time is shortened by 70%.

3. Quick treatment for local stains

For occasional small amounts of saliva or food stains on the net surface, simply wipe it with a damp cloth. There is no need for whole machine washing. It is suitable for frequent and simple maintenance.

Usage scenario

1. Regular use in indoor living spaces

Used in low-rise residences and in the south during the condensation season, Metal Frame Elevated Pet Bed prevents moisture from seeping into the floor and helps prevent pet skin problems. It can be used throughout the year, and in winter, it can be used in combination with soft cushions for added comfort.

2. Outdoor camping and short trips

Used on outdoor grasslands or cement surfaces, it avoids contact with insects and dew on the ground, and the hard frame is not afraid of being hit by gravel on the ground. It is more durable outdoors than fabric nests.

3. Temporary use for pet medical care and boarding

Easy to clean, with no dead corners where bacteria can breed, it meets the hygiene standards of pet boarding institutions, making it convenient for institutions to conduct unified disinfection, and has a high commercial repeat purchase rate.

Product Specifications Table

Compliance Qualification Statement

The factory has passed the EU BSCI social responsibility inspection and strictly controls the entire process of pipe cutting， fabric printing， and edge grinding for environmental pollution control. The labor rights， fire protection， and storage in the workshop meet the requirements for EU supply chain entry. An official inspection report can be provided to respond to overseas platform spot checks.

At the same time， it has passed the ISO9000 quality management system certification. Factory inspections are conducted on three indicators： rust prevention and corrosion resistance of metal pipes， color fastness of net fabric， and TPR anti-slip and wear resistance. This ensures uniform batch quality.

We hold a formal registered trademark of our own brand and can provide brand authorization and material testing documents.

FAQ

1. Will the elevated bed be too cold in winter?

The suspended structure only blocks the cold air from the ground and does not lose body heat. In autumn and winter, it can be used in combination with the same-sized plush soft cushions that fit the mesh surface. The soft cushions can be removed separately, providing both warmth in winter and coolness in summer.

2. Will the metal frame rust?

The surface of the frame is treated with electrostatic spray coating for rust prevention. Under normal indoor use, it will not rust. Only when exposed to long-term outdoor rain will it slightly oxidize. It is recommended to dry the frame water stains after rain.

3. Will the cat's vigorous scratching tear the mesh surface?

The 420D encrypted net fabric can withstand mild wear and tear from daily scratching. Frequent violent tearing of pets still have a risk of damage. For pets that bite violently, it is recommended to use a soft pad to prevent scratching.

4. Will the snap fasteners loosen after disassembly?

The snap fasteners are made of spring steel, with slow elastic decay. Normal disassembly and assembly within 50 times will not loosen. If there is loosening during long-term use, the snap fastener accessories can be replaced for free.

5. Will the printed pattern come off after washing?

The Metal Frame Elevated Pet Bed uses reactive printing, and has undergone water washing color fastness tests. After repeated machine washing for more than 15 times, there will be no obvious color fading. There will be no problem of ink printing peeling off.